Gledhill Solar Indirect Cylinder 180 Litres - Slimline

Stainless Lite indirect is an unvented hot water storage cylinder and is provided with a high efficiency internal primary coil which is designed for use with a gas or oil boiler. It is suitable for both open vented and sealed pumped primary systems. When used with a sealed heating system the boiler must incorporate its own energy cut-out overheat thermostat. Unvented cylinders must not be used with solid fuel boilers or steam as the energy source.

A high efficiency second solar coil is positioned below the primary coil to ensure maximum benefit of solar energy gain. For technical specification and dedicated solar volume, please refer to the table below.

Stainless Lite is manufactured in the latest high quality duplex stainless steel. They are designed to provide mains pressure hot water and are supplied as a package which complies with Technical Standard P3 (Scotland), Section G3 of the Building Regulations (England and Wales) and Building Regulations P5 (Northern Ireland).  They are fitted with all necessary safety devices and supplied with all the necessary control devices to make installation on site as easy as possible.

The cylinder is well insulated using high density HCFC free foam insulation with an ozone depleting potential (ODP) of zero and a global warming potential (GWP) of 1.

The Stainless Lite Unvented cylinders carry a 25 year warranty provided that the guarantee terms are adhered to. Please refer to the Gledhill Stainless Lite Design, Installation and Servicing Manual available to download below.