Details
The Zilmet HyPro solar vessels use the Zilan E solar membrane which is a 'bag' design and secured by a steel sealing plate.
The vessels are designed for system temperatures reaching 110°C, and peaks of 130°C.
Expansion vessels should always be located on the cool side of the system and as far from the collector as possible. To this extent connect points are located on the solar pump station. If the vessel can only be located in an extreme temperature location, then Intaeco and Zilmet recommend the addition of a VSG intermediate heat dissipation vessel to the expansion vessel installation.
Zilmet solar vessels are suitable for use in glycol based fluid systems with a mix ratio up to 50
VSG Intermediate Vessels: These tanks are equipped with entry and exit valves and are placed before the solar expansion tank. This tank provides heat dispersion by reducing the working temperature and therefore greatly increasing the life of the tank.
Product Information
 |
Hy-Pro Expansion Vessels (Size: 968.3 KB) | Data Sheet |
|
Solar Expansion Vessel Connection Kit & Isolation Valves (Size: 396.9 KB) | Data Sheet |
Additional Information
| Diameter (mm) | ~ |
|---|---|
| Pressure | 10 |
| Precharge | 2.5 |
| Connection | 3/4" |
You may also be interested in the following product(s)
Vessel Connection Kit M1 - MANUAL
Excl. VAT:
£29.95
Incl. VAT:
£35.94
|
ZSV 3/4" Vessel manual isolation connection valve
Excl. VAT:
£10.50
Incl. VAT:
£12.60
|
Vessel Connection Kit A1 - AUTO
Excl. VAT:
£35.00
Incl. VAT:
£42.00
|
You have no items in your shopping basket.
Email: info@renewable-energy-centres.co.uk
Showroom open by appointment
You have no items to compare.
© 2010 Renewable Energy Centres.